Heinner HPCK-6IX - Poultry; Vegetable; Steam

www.heinner.com 1000W, 50/60Hz, 220-240V
34
2. Poultry
1. Normal cooking: Under standby state, press the “Menu” button, “ ” indicator lights
on, the digital screen flashes “P01”, then press “+” one time, the digital screen displays
“P02”. 10s later if no button is pressed, the product automatically starts cooking at
“Poultry”, the digital screen displays “P02”, and starts countdown when pressure rises in
the cooker.
2. Preset cooking: Under standby state, press the “Menu” button, then press “+” one
time, the digital screen displays “P02”, press the “Delay Timer” button again, “Delay
Timer” indicator flashes, the digital screen flashes the time, start to adjust the preset
time, press the “+''/“-” button to adjust minute, press it once to adjust by 10min. 10s
after setting, the product automatically starts preset cooking at “Poultry”, the digital
screen displays the finishing time and starts countdown.
3. Exit work state: Press the button to exit the current work state.
3. Vegetable
1. Normal cooking: Under standby state, press the “Menu” button, “ ”indicator lights
on, the digital screen flashes “P01”, then press “+” two times, the digital screen displays
“P03”. 10s later if no button is pressed, the product automatically starts cooking at
“Vegetable”, the digital screen displays “P03”, and starts countdown when pressure rises
in the cooker.
2. Preset cooking: Under standby state, press the “Menu” button, then press “+” two
times, the digital screen displays “P03”, press the “Delay Timer” button again, “Delay
Timer” indicator flashes, the digital screen flashes the time, start to adjust the preset
time, press the “+''/“-” button to adjust minute, press it once to adjust by 10min. 10s
after setting, the product automatically starts preset cooking at “Vegetable”, the digital
screen displays the finishing time and starts countdown.
3. Exit work state: Press the button to exit the current work state.
4. Steam
1. Normal cooking: Under standby state, press the “Menu” button,“ ” indicator lights
on, the digital screen flashes “P01”, then press “+” three times, the digital screen displays
“P04”. 10s later if no button is pressed, the product automatically starts cooking at
“Steam”, the digital screen displays “P04”, and starts countdown when pressure rises in
the cooker.
2. Preset cooking: Under standby state, press the “Menu” button, then press “+” three
times, the digital screen displays “P04”, press the “Delay Timer” button again, “Delay
Timer” indicator flashes, the digital screen flashes the time, start to adjust the preset
time, press the “+''/“-” button to adjust minute, press it once to adjust by 10min. 10s
after setting, the product automatically starts preset cooking at “Steam”, the digital
screen displays the finishing time and starts countdown.
3. Exit work state: Press the button to exit the current work state.