35
E
2. Safety notes
Smoke detectors are intended to warn persons of fire smoke and
fires in good time, so as to give them sufficient opportunity to
accordingly react to the risk event.
Smoke detectors can neither prevent nor extinguish fires.
This smoke detector reacts early and reliably to smouldering fires and to
open fire with smoke development. If the detector detects smoke, it pro-
duces a loud audible alarm as well as simultaneously emitting a visual alarm
signal in the form of a red flashing indicator light.
Please make certain that a sufficient number of smoke detectors are
installed. Only in this way can comprehensive monitoring be effected and
maximum safety be achieved (
see item 6
).
The smoke detectors must not be painted over and the smoke inlet aper-
tures must not be taped over.
The correct installation of the smoke detector and the compliance with the
maintenance and care instructions are requirements for the trouble-free
operation of the smoke detector.
Hekatron recommends planning, installation, start-up and maintenance
according to DIN EN 14676.
Read these mounting instructions in their entirety before mounting and acti-
vating the smoke detector and keep these instructions for future reference.
7002739__MA Genius Hx_de-en-fr_110530.indb 35 06.06.2011 10:29:18
To Next Page
Loading...
