Held eVest Clip-in User Manual

34
EN
eVest Clip-in/eVest User Manual
06 Install a new inator
» [Warning]: Do not touch the full inator’s
connector with your ngers (blue piece on the
bottom of the inator). Do not connect the
inator’s cable before having screwed it in.
» [Warning]: Before carrying out the following
steps, check that the airbag system is comple-
tely void of air.
Step : Screw in the new inator
tightly.
Step : Check whether the inator is
correctly positioned, securely seated
in its slot.
Step : Plug the connector back in.
Check that it is properly connected and
plugged in fully
.
Step : Close the zipper to the top.
Step : Clip the inator into its
housing.
Step : To check if the inator is
new and properly connected, insert the
activated In&box into its slot.
The inator LED should turn green.

Held eVest Clip-in Specifications

General

Brand	Held
Model	eVest Clip-in
Category	Motorcycle Accessories
Language	English