Pag.3
General
The Hi-fire free-standing gas stove offers you the attractive sight of a living fire, combined with the comfort and
convenience of remote control operation.
The complete appliance is supplied with the surround and/or accessories of your choice.
Please refer to the installation instructions for the surround and/or accessories in question, which are packaged
separately from the Hi-fire stove.
Among the distinctive features of this appliance are its integrated door and an innovative closure, which is opened
or closed simply by applying pressure at the bottom left of the door.
Important: Do not open the door when the appliance is in operation.
Allow the appliance to cool first.
Be on your guard if there are children near the appliance when it is in use!
Read these instructions thoroughly before installing and using the stove.
Keep these instructions carefully. Always state type and serial number in the event of a breakdown.
This appliance should only be installed by a registered fitter.
Contents of package
1 x Base unit (Oak set) (Birch wood set Separate order)
1 x operation and installation manual
1 x Guarantee card
1 x log set (5 pc.)
1 x remote control
1 x Damper plate and Damper plate Ø 65
1 x Radiation plate
First firing
You should inspect the appliance for damage in transit immediately it has been delivered. If it is damaged, you
should report this without delay and as precisely as possible to your supplier.
Your Hi-fire is coated with heat-resistant enamel which can withstand extremely high temperatures.
Burn the fire on high during the first hours of use and ventilate the room well.
The curing of the enamel may produce a smell/smoke, but this is harmless, however.
Any marks on the glass can be best removed immediately with glass cleaner.
Guarantee (See Page 17 and 18)
Always complete your guarantee card in full and return it to your supplier immediately after purchase.
Type and serial number are shown on the plate which you will find on the rear of the stove.
To Next Page
Loading...