FAQ
Q: No image output?
A: 1) Check the power supply of splitter, make sure the power light is on.
2) Check if the HDMI cables connected well.
3) Check and make sure the TV has been set up to the right channel.
4) While connect with PC or notebook via HDMI, please make sure the output mode is mirror
or extend.
Q: Display is unstable, splash screen, snowflakes or audio stuck?
A: 1)Check and make sure all connections are good and correct.
2)Try to directly connect HDMI source to display, if it is the same, please change the source
device.
3)Use high-quality HDMI 1.4 cable and HDMI 2.0 for transmitting 4K×2K UHD signal
To Next Page
Loading...
Need help?
General