HELI CPCD 30 User Manual

FORWARD
The performance, structure, operation and maintenance and other aspects of the K
series 2-3.8t forklift truck are described in this manual in order to guide the operators
to use and maintain the truck properly.
The rules and notices in the manual should be abided seriously by all of relative
person to enable trucks in optimized working state for long period and bring the
highest efficiency.

HELI CPCD 30 Specifications

General

Model	CPCD 30
Load Capacity	3000 kg
Power Type	Diesel
Lift Height	3000 mm
Mast Type	2-stage
Weight	4470 kg
Load Center Distance	500 mm
Fork Length	1070 mm
Overall Width	1225 mm
Turning Radius	2400 mm
Travel Speed (laden)	18 km/h
Travel Speed (unladen)	20 km/h
Mast Tilt Angle	6/12 degrees
Wheelbase	1700 mm
Travel Speed (full load)	18 km/h
Travel Speed (no load)	20 km/h
Lift Speed (full load)	480 mm/s
Lift Speed (no load)	520 mm/s

Summary

FORWARD

I. Driving Operation and Daily Maintenance of Forklift Truck

Transport of Forklift Truck

Procedures for safely transporting forklift trucks.

Storage of Forklift Truck

Guidelines for proper storage of forklift trucks.

Precautions before Operation

Essential safety checks and precautions before operating the truck.

Operation of Forklift Truck

Safe and efficient operating procedures for the forklift.

Cautions on Cooling System

Important warnings and advice regarding the cooling system.

Oil for Forklift Truck

Specifications and recommendations for lubricating oils.

Lubrication Chart

A chart detailing lubrication points and intervals.

II. Specifications of Forklift Trucks

III. Description of Main Parts of Forklift Truck

IV. Construction, Principle, Adjustment and Maintenance of Forklift Trucks

Power System

Details on the engine, fuel system, and related components.

Clutch and Clutch Pedal

Explanation and maintenance of the clutch system.

Transmission, Reduction Gear and Differential

Construction and function of the transmission and drive train.

Hydraulic-powered Transmission & Torque Converter

Information on the hydrostatic transmission and torque converter.

Drive Axle

Components and maintenance of the drive axle system.

Steering System

Principles and components of the power steering system.

Steering Axle with Lateral Positioned Cylinder

Details on the steering axle and cylinder specifications.

Brake system

Operation and maintenance of the braking system.

Hydraulic system

Overview of the hydraulic circuits and components.

Lifting System

Components and adjustments for the mast and lifting mechanisms.

Electric System

Explanation of the truck's electrical system and components.