Helios KWL 45 BEU User Manual

Bedienelement
Controller
Commande à distance
KWL 45 BEU
mit LED-Anzeige
with LED display
avec affichage LED
Helios Ventilatoren
MONTAGE- UND BETRIEBSVORSCHRIFT
INSTALLATION AND OPERATING INSTRUCTIONS
NOTICE DE MONTAGE ET D’UTILISATION
DE
EN
FR

Helios KWL 45 BEU Specifications

General

Protection class	IP20
Housing material	Plastic
Power supply	230 V / 50 Hz
Air flow rate	45 m³/h
Operating temperature	+40 °C

Summary

Safety

Warning Instructions and Symbols

Explains safety-relevant warning symbols and the need to adhere to all safety regulations.

General Safety Instructions

Special regulations for use, connection, and operation, including electrical safety points.

Personnel Qualification Requirements

Controller Overview

Operation and General Functionality

Ventilation Stage Selection

Operating Mode Selection

Configuration and Settings

Configuration via EcoVent Verso Software

Guide to configuring the controller using the Helios EcoVent Verso software.

Software Configuration Actions

Details specific actions within the software for settings, data management, and security.

Configuration via Controller Interface

Fault Causes and Troubleshooting

Unit Start and Impeller Faults

Controller and System Faults

Specific Faults and Solutions

Electrical Connection

Electrical Connection Overview

General instructions for electrical connection, emphasizing isolation and authorized personnel.

Wiring Diagrams

Provides detailed wiring diagrams for various KWL EC 45 unit configurations.

Wiring Configurations

Illustrates specific wiring setups for different numbers of KWL EC 45 units and power supplies.