To Change Language Settings
1. When the console is not lit, start exercising on the product. As soon as the unit powers up,
simultaneously press and hold “QUICK START” and “CLEAR” keys for three seconds.
2. Simultaneously press and hold the “QUICK START” and “UP” keys.
3. Press the “UP” or “DOWN” key to view various language options. When your preferred language
appears, press and hold the “ENTER” key to select that language.
4. “SAVE OK” will appear. Press the “ENTER” key.
5. To resume normal use, stop exercising on the product, and let the console lights extinguish.
Then start exercising again. Normal operation should resume.
6. If the console is still in language selection mode, remove the batteries from the back of the
display console. Console lights will extinguish. Put batteries back into place. Resume normal use.
Other notes:
HLT2500 and HLT3500 consoles built before May 2016 will not offer all functions listed here. HLT3000
consoles will not have these functions unless the console has been replaced with a new version.
To Previous Page
Loading...
Need help?
General
