Hella marine NaviLED PRO User Manual

Hella marine LED navigation lamps offer many advantages over conventional bulb lamps.
Signicantly reduced power consumption, ultra long life and high tolerance to shock and
vibration make the LED lamps the ideal choice for the harsh marine environment.
The Hella marine NaviLED PRO series are precision optical instruments, tested and type
approved to comply with international maritime regulations. They are covered by a 5 year
warranty.
Warranty Statement
Dimensions
Electromagnetic Compatibility (EMC)
This LED lamp is an electronic device. The electrical circuits contain components that
suppress possible interference, both emission as well as susceptibility, to the limits
prescribed in international regulations.
Protection against damage due to voltage spikes
This lamp is protected against reverse polarity connection, positive voltage spikes up to
+500 volts and negative voltage spikes of up to 700 volts.
For general comments about HELLA Marine products please e-mail techfeedback@hellamarine.com
Congratulations! The product you have selected comes from HELLA – one of the world's
leading manufacturers of lighting products. The product comes with a 5 year warranty
from end user purchase covering faults in materials, components or workmanship.
In the unlikely event that you should experience a conrmed warranty related problem with your
purchase, HELLA will, at its discretion, either repair, replace or refund the purchase price of the
product.
Warranty services may be obtained by returning the product within the warranty period to the
HELLA dealer where the product was originally purchased.
This warranty is in addition to and does not preclude any other rights or remedies available to the
consumer under any local legislation related to the provision of goods or services.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
This warranty does not cover:
1.) Claim/s as a result of normal wear and tear or of any modications and / or alterations to the product in any
shape or form.
2.) Claim/s as a result of non-compliance of the assembly, service and operating instructions and/or any unt or
improper use.
3.) Any expenses incurred in the process of making the claim.
Note: For lamps sold in Australia warranty services are provided by HELLA Australia Pty Ltd,
54-76 Southern Rd, Mentone VIC 3194. Customer Service 1800 061 729,
custservice@ha.hella.com, www.hella.com/hella-au/21.html
b
c
a
d
Dimensions
a = 87mm / 3.43”
b = 90mm / 3.54”
c = 57mm / 2.25”
d = 50mm / 1.97”
b
c
a
d
Dimensions
a = 87mm / 3.43”
b = 90mm / 3.54”
c = 57mm / 2.25”
d = 50mm / 1.97”
b
c
a
d
Dimensions
a = 87mm / 3.43”
b = 90mm / 3.54”
c = 57mm / 2.25”
d = 50mm / 1.97”
b
c
a
d
Dimensions
a = 87mm / 3.43”
b = 90mm / 3.54”
c = 57mm / 2.25”
d = 50mm / 1.97”
Designed and Manufactured in New Zealand
958 780-49 (ENG-GER-FR) V05
NaviLED PRO Bi-Colour Integrated Timer
To ensure long term safety, each NaviLED PRO Bi-colour lamp is equipped with a timing circuit.
Once the lamp has operated for a total time of 10,000 hours, the lamp activates ‘Service Mode’.
Service Mode is indicated by the lamp ashing at a rate of 60 ashes per minute for 15 seconds as
soon as the lamp is switched on. This will occur for 15 seconds every time the lamp is switched on
until the unit has operated for another 2000 hours.
After 2000 hours the Service Mode ash rate doubles to 120 ashes per minute for 15 seconds as
soon as the lamp is switched on.
To ensure the lamp meets the light output criteria of its certication, Hella marine recommends the
light module be replaced as soon as it enters this 2000 hours Service Mode stage. By regular
recreational boating standards, even with regular night sailing, 'Service Mode' will hardly ever be
reached.
BSH certied NaviLED PRO
2 Nautical Mile Bi-Colour Navigation Lamp
Material Description UV resistant lens, high impact shroud
Minimum Visible Distance 2 Nautical Miles
Cable Pre-wired with 2.5m of marine cable
Operating Voltage Multivolt 9-33V DC
Voltage Protection Spike protected to +500 volts
Reverse polarity protected to -700 volts
Power Consumption Less than 2W (0.14A@12V/0.08A@24V)
Degree of Protection IP67 – Completely sealed
Weight 150g (including cable)

Hella marine NaviLED PRO Specifications

General

IP Rating	IP67
Type	Navigation Lamp
Voltage	12V/24V
Mounting	Screw Mounting
Visibility	2 Nautical Miles
Supply Voltage	12/24V DC
Material (Housing)	Polyamide
Mounting Type	Screw Mounting

Summary

Warranty Statement

NaviLED PRO Bi-Colour Navigation Lamp

Technical Specifications

Details materials, visibility distance, cable, voltage, power, protection, dimensions and weight.

Electromagnetic Compatibility and Protection

Covers EMC compliance and protection against voltage spikes and reverse polarity.

NaviLED PRO Bi-Colour Integrated Timer

Lamp Positioning

General Recommendations

Ensures the lamp is not obstructed and is positioned correctly for visibility.

Position in relation to vessel's centre line

Specifies vertical positioning perpendicular to the vessel's centre line.

Horizontal positioning

Recommends placement forward of amidships and as far forward as practicable.

Wiring Colour Coding

Assembly and Removal

Assembly Steps

Guides through making provision for the cable, mounting the shroud, and inserting the optic assembly.

Removal Steps

Details how to carefully remove the optic assembly from the shroud.