PARTS & FEATURES
1. ON/ OFF Control Switch
2. Speed Control Rotary Switch
3. Timer Rotary Switch
4. Blade
5. Louvre
6. Base
BEFORE FIRST USE
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.
OPERATING INSTRUCTIONS
1. Mount the feet on the base of the fan.
2. Place the fan on a firm and level surface.
3. Ensure the fans rotary switch is in the ‘0-OFF’ position. Plug the unit into the power outlet and
turn the power ‘ON’. Ensure that the plug first tightly in the power outlet, as loose fit may cause
overheating, damage to the plug and socket, and create a serious safety hazard.
4. Adjust the fan speed by turning the rotary switch to the desired speed:
• 1 – LOW
• 2 – MEDIUM
• 3 – HIGH
NOTE: Before inserting the plug into a power outlet, make sure that the correct voltage being used
corresponds to what is indicated on the rating label, and that the socket has an earth facility.
To Next Page
Loading...
General