Operation of Control Panel
CAUTION
a. The temperature of food before cooking should be between 20-25°C. Any foods
higher or lower in temperature may require longer or shorter cooking times.
b. The temperature, weight and shape of the food strongly inuences the cooking
eect of the oven. If any dierences are found in comparison to the above may
require adjustments to cooking time to achieve the best results.
Grill Function
There are 3 Grill options, G, C-1 and C-2. The options are Grill, Combination 1
(Grill and Microwave cooking), Combination 2 (Grill and Microwave Cooking).
Press the “GRILL” button to continuously cycle through each option for your de-
sired food option. The display will indicate the corresponding Grill mode from “G”,
“C-1” or “C-2”. Turn the knob to select cooking time ranging from 0:10 to 60:00.
After selecting your desired cooking time, press the “START/+30s” button to begin
operation. A beeping noise will notify you of the operations completion.
G Grill option. The heat element will be energised during operation.
This option grills thin meats or pork, sausage, chicken wings to
brown the outer surfaces of the food.
C-1 Combination of grill and microwave cooking. 30% microwave and
70% grill cooking.
C-2 Combination of grill and microwave cooking. 55% microwave and
45% grill cooking.
CAUTION
While using the Grill functions of the appliance, all parts of the microwave oven,
as well as the rack and cooking contains, may become extremely hot. Use caution
when removing any item from the appliance. Use heavy potholders or oven mitts
to prevent burns.
Reheat
The reheat function is used to heat food according to the weight of the food. Press
the “REHEAT” button to cycle through the appropriate weight options for your
foods. The weight options are as follows, 200g, 400g, 600g, 800g, and 1000g.
After selecting the corresponding weight, press the “START/+30s” to begin
operation. A beeping noise will notify you of the operations completion.
Stop
During operation, you may press the “STOP” button to immediately stop all
ongoing operations and return to its standby state.
To Next Page
Loading...
