HELLER HPC1000 - Warm Function Operation; Sear Function Operation

15
This function will let you manually adjust the time you would like to keep your food
warm.
DIRECTIONS:
1. Press the “warm” button, display will show “04:00”.
2. Press the “+” or “-“button to increase or decrease the time. See
“hours/minutes” section for instructions on adjusting the time.
3. Press the “start/stop” button to start.
Note:
- The default time for the warm functions is 4 hours, the minimum time is 1 hour and the
maximum time is 24 hours.
- You can adjust the time in 5-minute and 1 hour increments.
The Pressure Cooker will automatically go to these warm functions when a desired preset has
completed. Refer to the Auto Warm Feature chart on page 14 for default warm times.
Example:
This function lets you “sear” your food before cooking under pressure or before using
the Slow Cook function.
DIRECTIONS:
1. Press the “sear” button. Display will show “00:05”.
2. Press the “start/stop” button to start.
3. See the “hours/minutes” section for instructions on manually adjusting the time.
Note:
- Do not close lid when using “sear” function.
- The minimum time is 1 minute (00:01).
- The maximum time is 20 minutes (00:20).
- When complete, the display will show “End”.
Example: