HELLER HPC1000 User Manual

19
CARE & MAINTENANCE
AFTER EACH USE:
- Switch off the pressure at the power outlet and then unplug prior to cleaning.
- Allow all parts to cool before removing the removable or cleaning any parts of the unit.
- Wipe the base and inside of the base, if necessary, with a clean cloth.
- Remove and clean the water collection box. Wipe with a wet towel and insert it back to the body
of the pressure cooker.
- The lid can be detached from the base. See image under “Operating Instructions” step 1 for
proper assembling instructions. All parts inside the lid can be hand washed separately with water
and should always be checked to make sure they are not damaged or cracked.
- Use a sponge or non-metallic soft brush to clean the inner pot, then wipe the surface with a clean
cloth.
CAUTION: Do not use abrasive cleaners, steel wool, or metal scouring pads as these can damage the
non-stick surface.
- The Stainless Steel Housing can be wiped over with a damp cloth and then dried thoroughly.
NOTE: NEVER IMMERSE THE BASE IN WATER OR ANY OTHER LIQUID, OR SPRAY ANY WATER IN IT.
FOR YOUR SAFETY
 Do not operate any product with a damaged cord or plug, or after the product malfunctions, or is
dropped or appears damaged in any way. Return the complete product to the place of purchase
for inspection, repair or replacement.
 Switch off and unplug from outlet when not in use, before assembling or disassembling parts and
before cleaning. Remove by grasping the plug - do not pull on the cord.
 The appliance has no user serviceable parts. In the event that it is dropped or damaged in any
way, or fails to operate it should be returned to the place of purchase, together with your
purchase receipt or the address below for repair or replacement.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
RESOLUTION
Difficulty closing lid.
Silicone Gasket may not be
placed correctly.
Floater Valve may be blocking
the push rod.
Place the Silicone Gasket
correctly.
Push the Floater Valve to the
correct position.
Difficulty opening lid.
The Floater Valve may not be
falling down properly.
Pot may still be under pressure.
Push the Floater Valve correctly.
Gas leakage from cooker lid.
Some ingredients may be stuck
to the Silicone Gasket.
Silicone gasket may be broken.
Clean the Silicone Gasket.
Make sure that the lid is closed
as per instructions in heading

HELLER HPC1000 Specifications

General

Brand	HELLER
Model	HPC1000
Category	Electric Pressure Cooker
Language	English