HELO CAVA – ASSEMBLY INSTRUCTIONS FOR THE HEATER SOAPSTONES
Before the installation of the soapstones the heater has
to be fixed to the wall. See the instructions on page 2.
Take the front soapstones out from the package.
The stone to be placed as the lowest has rounded lower
corners. Pass the stones carefully along the loop. The
other (4 pcs) soapstones have even edges and
therefore it does not matter in which order they are
placed.
Install the intermediate pieces (8) of the soapstones so
that the projection will always stay on the stone i.e. there
will always be an air gap between the stones.
The metal pieces are placed on each side between e
stone (except the uppermost).
ach
Once the front soapstones have been installed, place
the stones meant to be inside the heater (approx. 30kg).
Some stones also have to be placed on the resistance
elements.
NOTE! No heater stones should be placed between
the first resistance element and the front
soapstones. The heater should not be used without the
front soapstones or when the stones have cracks on
them.
7
To Next Page
Loading...
