Comfort programs
In automatic operation there
is a control with the switching
times of the comfort programs:
• Week (Mon–Sun)
• Weekdays (Mon-Fri)
• Weekend (Sat–Sun)
• Day (Mon, Tue, Wed, Thu, Fri, Sat,
Sun)
Every weekday can include four switch-
ing times (P1 - P4). After reaching the
starting time, the comfort tempera-
ture is adjusted. Outside the switching
times control is performed according
to the reduction temperature. The pre-
defined switching times can be adapt-
ed individually:
Mon–Fri: 5.00 am - 8.00 am
3.00 pm - 10.00 pm
Sat - Son: 6.00 am - 11.00 pm
ü Confirm the selection by
pressing.
VThe display switches to the
comfort program overview;
the display indicates “day”.
ü Select and activate a com-
fort program.
ü Select a switching time P1
to P4.
ü Set the start time and the
end time by rotating and
apply by pressing.
ü Return to the comfort pro-
gram overview with “BACK”.
ü Set further switching times
or change to the Settings
menu with “BACK”.
• Automatic operation must be
activated.
• The comfort and reduction
temperatures must be set in
the Settings menu.
• The current time indications
must be set.
• If connected room thermo-
stats are in automatic oper-
ation, the Comfort programs
allow a change between day
and night operation.
Settings menu
To Next Page
Loading...
