HENDEN INSTALLATION & OWNERS MANUAL | 3
Contents
Henden Salt and Mineral Chlorinator
INSTALLATION
1. INSTALLATION INSTRUCTIONS 7
1.1 Installing the power supply 7
1.2 Installing the cell 7
1.3 Connecting the electrolytic cell to the
power supply 8
1.4 Connecting the flow switch to the cell housing 8
1.5 Pre-start up procedure 9
OWNERS MANUAL
IMPORTANT INFORMATION ABOUT YOUR CHLORINATOR 10
2. OPERATION OF YOUR HENDEN SALT AND
MINERAL CHLORINATOR 11
3. CONTROL PANEL 11
3.1 Layout 11
4. INITIAL START-UP 11
5. TYPICAL (EVERYDAY) START-UP 16
6. HENDEN SALT AND MINERAL CHLORINATOR FEATURES 17
6.1 Controlling chlorine output 17
6.2 Automated timers 18
6.3 Activating cover mode 21
6.4 Activating boost mode 23
6.5 Activating spa mode 25
6.6 Activating spa mode and cover mode simultaneously 26
6.7 Activating winter mode 27
6.8 Low flow alarm 28
6.9 Add salt alarm 28
6.10 Low salt cut-out alarm 29
6.11 Add salt alarm and low flow alarm 29
6.12 Overriding clock setting 30
6.13 Overriding date setting 31
6.14 Overriding language setting 32
6.15 Overriding time format setting 34
6.16 Display alarm history 35
7. MAINTENANCE OF POWER SUPPLY 36
8. MAINTENANCE OF THE ELECTROLYTIC CELL 36
8.1 To clean the HSMC cell 37
8.2 Re-Installing cell after cleaning or replacement 37
8.3 Safety device 38
9. DAY TO DAY OPERATION 38
9.1 Stabiliser 38
9.2 ph and total alkalinity 38
9.3 TDS levels 38
9.4 Running times 39
10. CHLORINE PRODUCTION 39
10.1 “Shock” treatment 39
10.2 Chlorine types and comparisons / Max pool size 39
11. GENERAL INFORMATION 40
11.1 Pool water chemistry instructions 40
12. TROUBLE SHOOTING 40
13. HENDEN
™
REPAIR OR REPLACEMENT GUARANTEE 42
To Next Page
