Hendi 208953 - Page 26

EN
26
10. TRANSPORT AND RECYCLE
TRANSPORT
• Please save the packaging of the coffee machine for future transportation.
•Make sure to empty water inside the machine before transportation,
otherwise, it will damage the machine.
• After emptying the waterway, please wipe the machine both inside and
outside to dry.
• Once the empty waterway program was executed, the system will rerun
to the program of “first-time use”, when the coffee machine is used again.
(refer to P10, First-time use).
• While emptying the waterway
, there will
be a high-temperature steam
sprays from coffee spout. Please pay special attention to avoid being scalded.
RECYCLE
When recycling the machine, some inner parts can be recycled to use again.
Please pay attention to recycle them for environmental protection.
11. TECHNICAL DATA
(037<81,7
),//:$7(57$1.
5($'<
The machine is on the status of “READY”.
Take out the water tank, and the machine
indicates “FILL WATER TANK”.
Long pressing the cleaning button until the screen
shows "EMPTY UNIT", the machine begins to clean
up the waterway automatically, and steam will spray
from the coffee spout, please keep distance to
avoid scalding.
After emptying the waterway, the machine
will automatically power off. Take the drip
tray out after the power is switched off, and
clear the water in the drip tray.
Model 208960, 208977, 208984 208854, 208892, 208953
Dimensions 302x450x(H)370 mm 302x450x(H)590 mm
Supply/Frequency 230 V ~50/60 Hz 230 V ~50/60 Hz
Power 1400 W 1400 W
Pump pressure 19 bar 19 bar
Capacity of water tank 1,8 l 1,8 l
Capacity of bean container 250 g 750 g
Capacity of coffee grounds container 15 cakes 50 cakes
Capacity of the brewing unit 7-14 g 7-14 g
Adjustable scope range 80-140 mm 80-140 mm
Length of power cord 1,5 m 1,5 m
Net weight 11,5 kg 13 kg