7
EN
Storage
• Before storage, always make sure the appliance
is clean, has already been discontinued from the
power supply, and cooled completely.
• Store the appliance in a clean, dry and cool
environment.
Cleaning and maintenance
• After use, unplug the appliance from the power
socket and allow it to cool down.
• Clean the inside and outside of the body, trays,
residue tray and door with luke-warm water, a
mild detergent and a soft cloth. Do not clean the
engine parts.
• Use a brush to remove any encrustations from
the trays.
• Dry all parts with a dry cloth before storing the
dehydrator.
• Occasionally clean the fan unit with a vacuum
cleaner.
• Note! To avoid damaging the appliance do not
clean the appliance with aggressive chemicals or
abrasives.
Trouble shooting
Problem Possible cause Solution
On/off switch doesn’t light red No power Check if the plug is connected to the
power socket
Switch defect Contact the supplier
Chamber doesn’t get warm Heating element, thermostat or fan might
be defect
Contact the supplier
Chamber get’s too warm Heating element or thermostat might be
defect
Contact the supplier
Drying takes to long Humid conditions Place the appliance in a less humid
environment
Heating element, fan or thermostat is defect Contact the supplier
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
To Next Page
Loading...
