8
EN
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the heating surface
during storage as it may crack it.
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
• Error codes shown on the digital display (5). (See
--> Error codes display)
Problems Possible cause Possible solution
The appliance does not switch ON.
- Power plug is not connected properly
with the electrical outlet.
- Without switch ON the appliance by turn
ON the knob.
- Check the power plug to make sure
it is connected properly.
- Switch ON the appliance by turning
ON the knob.
Cooling fan is operating even after
the appliance is switched to OFF
mode.
- This is normal. The cooling fan contin-
ues running in Standby mode for some
time to cool down all internal elements.
- Wait until the cooling fan stops ro-
tating.
Technical specification
Item no. 239698 239711
Operating voltage & frequency 220-240V~ 50/60Hz
Rated input power 3500W
Temperature setting 35°C ~ 240°C (with 5 °C interval)
Power setting 100W ~ 3500W
Timer setting Up to 180 minutes
Protection class Class I
Waterproof protection class IPX3
Dimension 390 x 500 x (H) 120 mm 340 x 440 x (H) 120 mm
Remark: Technical specification is subjected to change without prior notification
To Next Page
Loading...
