EasyManua.ls Logo

Hendi 240502 - Technical Specifications; Operation Guide; Water Filling and Power Connection; Heating and Temperature Control

Hendi 240502
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EN
Grounding Installation
This appliance is classified as the protection class I
and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly in-
stalled and grounded.
Technical specifications
240502 240519
Supply voltage 230V~ 50-60Hz 230V~ 50-60Hz
Power consumption 1000W 2 x 1000W
Drain taps No Yes
Container capacity 10 L 2 x 10 L
Technical specifications are subjected to change without prior notice.
Operation
Fill the container with water only between the
MIN and MAX level.
Connect the power plug with a suitable electri-
cal outlet. Make sure the electrical power supply
voltage rating corresponds with the power supply
details shown on the appliance rating label.
Turn ON the appliance by pressing the green ON/
OFF switch.
Select the temperature by turning the tempera-
ture control (up to 85ºC) clockwise. Then, orange
indicator lights up.
Once the set temperature is reached, the orange
indicator will go off automatically.
Now, you are ready to put the sausages into the
container for heating.
Risk of splashing! Slowly immerse the sausages
into the water.
Note:
• Only water can be poured into the container. Check the water level regularly during operation.
Add water if the water level below MIN level.
After use
Turn OFF the appliance by pressing the green
ON/OFF switch.
Unplug the appliance from the electrical outlet.
• Allow the appliance & water to cool down.
Take care when pouring out the water & using
the handles or drain taps (for item 240519 only).
Cleaning and maintenance
Always remove the plug from the socket before
cleaning the appliance.
Beware: Never immerse the appliance in water
or any other liquid!
Clean the outside of the appliance with a damp
cloth (water with mild detergent).
Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
Clean the ventilation slots (if applicable) with the
vacuum cleaner.
Regularly descale the bottom of the water con-
tainer.