6
EN
Trouble Shooting
Problems Possible causes Possible solutions
The appliance is plugged in, turned
on, the indicator lights up but the ap-
pliance does not heat up.
1). Thermostat broken
2). Heating element failed
Contact the supplier
The appliance is plugged in, turned
on, the indicator lights up but heating
temperature is out of control.
Thermostat failure Contact the supplier
The appliance is plugged in, turned
on, the indicator lights up but heating
temperature is out of control.
Orange indicator broken Contact the supplier
The appliance is plugged in, but does
nothing else.
Faulty power supply, not properly
plugged in.
Check the power supply system or
plug in properly.
Overload circuit breaker tripped
This appliance is fitted with an automatic overload
circuit breaker.
To make the appliance operational again, first al-
low the appliance to cool down, then fill with addi-
tional water.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Discarding & Environment
At the end of the life of the appliance, please dis-
pose of the appliance according to the regulations
and guidelines applicable at the time.
Throw packing materials like plastic and boxes in
the appropriate containers.
To Next Page
Loading...