5
EN
Exterior Structure
1. Heating indicator
2. Temperature controller
3. ON/OFF switch
4. Housing
5. Drip tray
6. Lower grill plate
7. Opening support system
8. Upper grill plate
9. Upper grill plate handle
10. Power cord
11. Rubber feet
Features of Function and Structure
• The upper and lower grill plates are enameled
and are easy to clean.
• Independent temperature controle on the double
contact grill is convenient and allows the use of a
single grill plate.
• Internal temperature protector is reliable and
safe.
• Grilling temperature is adjustable.
• Made of stainless steel and the drawer-style
dripping tray is also made of stainless steel.
• Grill is easy to open thanks to the support sys-
tem.
Operating instructions
• Before use, make sure the supply voltage match
with the rating plate.
• Plug into the socket & switch on the appliance.
• Set temperature controller clockwise to the de-
sired temperature. The orange indicator light up.
The upper and lower grilling plate starts heating
up.
• Temperature can be adjusted depends on differ-
ent food within 180°C to 250°C.
• After approx. 8 minutes, swivel the upper griling
plate with the handle.
• Put some edible oil on the upper & lower grilling
plate.
• Place the food to be grilled on the lower gilling
plate and then close the appliance using the han-
dle. Keep an eye during cooking.
• When the temperature reaches the setting value,
the orange indicator light off.
• At the front side of the lower grilling plate, there
is the drip tray. The remaining edible oil will flow
to the drip tray.
• Open the appliance by lifting the handle and take
away the grilled food.
• After finish grilling, set the temperature control-
ler to the “OFF” position and unplug the appli-
ance.
To Next Page
Loading...
