EasyManua.ls Logo

Hendi Profi Series - Important Notice to UK Users; UK Mains Plug and Fuse Information; Connecting the Mains Plug

Hendi Profi Series
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
NL
Important notice to UK users
This appliance is fitted with a UK approved mains
plug and a 13A fuse. Should the fuse need to be
replaced, an ASTA or BSI approved BS1362 fuse,
rated at 13A must be used. If the plug needs repla-
cing, ensure that the fuse is removed beforehand.
Always dispose of defunct plugs and fuses imme-
diately.
Connecting a mains plug
The wires in the mains lead are coloured as following:
Blue: NEUTRAL Brown: LIVE Green & Yellow: EARTH
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire coloured BLUE must be connected to
the terminal marked with the letter N or colour-
ed BLUE or BLACK.
The wire coloured BROWN must be connected to
the terminal marked with the letter L or colour-
ed BROWN or RED.
The wire coloured GREEN & YELLOW must be
connected to the terminal marked with the letter
E or coloured GREEN or GREEN & YELLOW or
marked with the Earth Symbol
If you have any doubt about the electrical supply to you appliance, consult a qualified electrician before use.
EN

Related product manuals