18
Manual Override
If the Horizontal Dock experienc-
es a loss of power or becomes
disabled while the MacBook is
docked, a Manual Override can
be performed to remove the
computer from the dock.
To perform a Manual Override,
disconnect all peripherals and
the Horizontal Dock’s power
supply. Close the MacBook’s
display and turn the docked
computer over onto a level
surface. Remove the rubber
foot from the bottom of the
dock chassis by pulling it away
from the hidden catches. Once
the foot is removed, the orange
Manual Override Gear will be
revealed.
The Manual Override
feature is for
emergency use only, misuse
can result in permanent
damage to the Horizontal
Dock. Before attempting
a Manual Override please
contact customer support at
info@hengedocks.com
To Next Page
Loading...
