Need help?Do you have a question about the Henge Docks Vertical Docking Station and is the answer not in the manual?
General| Category | Docking Station |
|---|---|
| Material | Aluminum |
| Color | Silver |
| Type | Vertical Dock |
| Compatibility | MacBook |
Select the correct Adapter Tool for your MagSafe power supply type.
Loosen the cover anchor using the included hex key.
Place MacBook in dock and flip the unit over in your lap.
Insert MagSafe and Adapter Tool into the MacBook.
Slide the cables into the cable organizer at the back of the dock.
Carefully flip the computer and dock back over onto a stable surface.
Secure the cover anchor with the hex key and connect peripherals.
Pull back the screw cover to access the setscrews.
Locate ports and loosen setscrews for Mini DisplayPort cables.
Remove Mini DisplayPort cables and insert Thunderbolt cables.
Slide the Thunderbolt cables into the cable organizer.
Flip the computer and dock back over onto a stable surface.
Tighten setscrews, realign cover, and secure cover anchor.
Gently lower computer to dock; firmly pull vertically to undock.
Ensure a secure grip during docking/undocking to prevent damage.
Do not over-tighten setscrews; minimal pressure is required.
Install only original Henge Docks and Apple sourced accessories.
Ensure headset is installed before docking for microphone recognition.
Verify power, display, keyboard, and mouse connections for sleep/wake.
Use only approved Thunderbolt cables to prevent port binding.
Step-by-step guide to re-seat cables for proper docking function.
Product is warranted for 90 days from purchase date.
User assumes risk; liability is limited to purchase price or $100.
To Next Page
