1
、
INTRODUCTION ------------------------------------------------- 1
2
、
ASSEMBLY ------------------------------------------------- 1
3
、
INSTALLATION ------------------------------------------------- 1
4
、
PRECAUTION ------------------------------------------------- 1
5
、
FEATURES ------------------------------------------------- 2
6
、
AVAILABLE UNITS ------------------------------------------------- 2
7
、
PANEL AND KEYPAD DEFINITION ------------------------------------------------- 2
7. 1 FUNCTION SETTING ------------------------------------------------- 4
7. 2 PARAMETER SETTING ------------------------------------------------- 4
BACKLIGHT SETTING ------------------------------------------------- 4
RESOLUTION SETTING ------------------------------------------------- 4
FILTER SETTING ------------------------------------------------- 5
ZERO BAND SETTING ------------------------------------------------- 5
BAND RATE SETTING ------------------------------------------------- 5
BUZZER SETTING ------------------------------------------------- 5
CHECK-WEIGHING MODE SETTING ------------------------------------------------- 6
CHECK-WEIGHING MEMORY SETTING ------------------------------------------------- 6
RS232 OUTPUT FORMAT SETTING ------------------------------------------------- 6
EXTERNAL DEVICE SETTING ------------------------------------------------- 7
AUTO TARE SETTING ------------------------------------------------- 7
RS232 OUTPUT CONTENT SETTING
------------------------------------------------- 7
RS232 OUTPUT CONTENT SETTING
------------------------------------------------- 7
UNITS SETTING ------------------------------------------------- 7
INITIAL UNIT SETTING ------------------------------------------------- 8
8
、
KEYPAD ------------------------------------------------- 8
ZERO ------------------------------------------------- 8
TARE ------------------------------------------------- 8
PRE-TARE ------------------------------------------------- 9
0~9 AND
●
------------------------------------------------- 9
IMPUT ELIMINATE ------------------------------------------------- 9
WEIGHING FUNCTION CONVERSION ------------------------------------------------- 10
UNITS CONVERSION ------------------------------------------------- 10
SAMPLE IN PCS AND % MODE ------------------------------------------------- 10
PRINT ------------------------------------------------- 10
RETURN ------------------------------------------------- 10
NET AND TOTAL WEIGHT CONVERSION ------------------------------------------------- 10
ACCUMULATE ------------------------------------------------- 11
ACCUMULATE DISPLAY ------------------------------------------------- 12
ACCUMULATION ELIMINATE ------------------------------------------------- 13
CHECK-WEIGHING ------------------------------------------------- 14
AUTO TARE ------------------------------------------------- 14
9
、
CALIBRATION OPERATION ------------------------------------------------- 15
9.1 CALIBRATION
（
six point calibration
）
------------------------------------------------- 15
9.2 SINGLE POINT CALIBRATION ------------------------------------------------- 16
10
、
INTERNAL COUNT DISPLAY
，
TESTING ------------------------------------------------- 17
11
、
RTC ------------------------------------------------- 18
RTC TIME DISPLAY ------------------------------------------------- 19
RTC TIME SETTING ------------------------------------------------- 20
12
、
ERROR MESSAGE ------------------------------------------------- 21
12.1 ERROU MESSAGE ------------------------------------------------- 21
12.2 TROUBLE SHOOTING ------------------------------------------------- 21
13
、
SPECIFICATIONS ------------------------------------------------- 21
(normal type) ------------------------------------------------- 21
(high resolution and filter type) ------------------------------------------------- 22
14
、
RS-232 OUTPUT FORMAT ------------------------------------------------- 22
To Next Page
Need help?
General