Hengx HXB series User Manual

PRECISION BALANCE
USER’S MANUAL
MODEL-X 2007-V2.0

Hengx HXB series Specifications

General

Model	HXB series
Category	Scales
Material	Stainless steel platform
Display	LCD display
Power Supply	AC adapter or rechargeable battery
Function	Weighing, Counting

Summary

Precautions

Key Descriptions

Functional Operation of Keys

Weighing Operation

Instructions for using the weighing function, including starting and backlight control.

Counting Operation

Steps for using the counting function, including sample size selection.

Percentage Operation

Steps for using the percentage function, including sample size selection.

Single Point Calibration of Weight

Single Point Calibration of Weight when Power on

Linearity Calibration of Weight

Parameter Setting

Weight Unit Selection

Configuration for selecting different weighing units.

Initial Weight Unit Selection

Setting for initial weight unit based on region or application.

Transfers Rate Selection

Filter Selection

Backlight Selection

External Device Selection

Parameter Function Description

Unit Selection Mode

Initial Unit Selection

RS-232 Transfers Rate Selection

Parameter Function Description (Continued)

Auto Zero Range Selection

Filter Setting Mode

Backlight Setting Mode

Printing Mode Selection

Parameter Function Description (Final)

External Device Selection Mode

Display Range Selection Mode

RS-232 Serial Interface

Interface Specifications

Details the 9-pin connector, baud rate, data bit, parity bit, and stop bit.

Data Format

Defines the data format for serial communication, including bit assignments.