Henkel Loctite 98548 User Manual (English)

cassandrabaldwinAug 18, 2025

Why is the Henkel Loctite 98548 Dispenser not dispensing liquid?

K
Kevin ShannonAug 18, 2025
If the Henkel Dispenser is not dispensing liquid, consider the following: * Check that the tube is properly set in the groove. If not, insert the tube appropriately. * If the shape of the rotor is impressed on the tube, reset the tube and turn the rotor while closing the Tube Guide. * Ensure you are using the tube specified for your machine type; if not, use the specified tube. * Verify that the guide is properly set; if not, set the guide properly. * Confirm that the guide support bolt is firmly tightened. If it isn't, tighten the bolt up firmly.

Brand	Henkel
Model	Loctite 98548
Category	Dispenser
Language	English

Brand

Henkel

Model

Loctite 98548

Please Observe the Following

Emphasized Sections

Explains symbols like Warning, Caution, and Notice used throughout the manual for clarity.

Items Supplied

Lists all components and accessories included with the Benchtop Peristaltic Dispenser.

Field of Application

Describes the intended use and application range of the dispenser for various adhesives.

Safety Precautions

Provides essential safety instructions and warnings for safe and proper operation of the unit.

Description

Operating Elements and Connections

Identifies and explains the function of all controls, displays, and connectors on the unit's front and back panels.

Theory of Operations

Explains the working principle of the peristaltic dispenser and how it transfers low viscosity liquids.

Setup and Operation

Environmental Conditions

Specifies suitable operating conditions such as temperature, humidity, and altitude for the unit.

Connecting the Unit

Details how to connect the optional foot switch, power cord, and manual applicator.

Mounting the Feedline to the Dispenser

Step-by-step guide on how to install the product feedline into the dispenser rollers.

Mounting the Feedline to the Applicator

Instructions for attaching the feedline to the manual applicator and dispensing needle.

Mounting the Feedline to the Product Bottle

How to connect the feedline to cyanoacrylate and anaerobic product bottles.

Dispensing Setup and Modes

Configure dispensing time, speed, and select operating modes (Timer, R.C., Cont.).

Shutdown Procedure

Procedure for safely turning off the dispenser after use.

Return to Operation

Instructions for safely restarting the dispenser, especially in continuous mode.

Cleaning and Maintenance

General Cleaning and Feedline Care

General cleaning advice, roller lubrication, and feedline replacement considerations.

Changing the Pump Head

Detailed steps for removing and replacing the pump head, including safety warnings.

Troubleshooting

Malfunction and Correction

Table listing common problems with the unit and their recommended solutions.

Annex

XS 1 Interface Details

Diagram and explanation of the XS 1 interface for controller and footswitch connections.

Accessories and Spare Parts

List of available accessories and replacement parts with their order codes.

Declaration of Conformity

Regulatory compliance statement from the manufacturer regarding EC directives.

Henkel Loctite 98548 User Manual

Table of Contents

Questions and Answers:

Henkel Loctite 98548 Specifications

Summary