Need help?Do you have a question about the Henkelman Jumbo and is the answer not in the manual?
General| Brand | Henkelman |
|---|---|
| Model | Jumbo |
| Category | Kitchen Appliances |
| Language | English |
Explanation of symbols used for warnings and informational tips within the manual.
Identification and meaning of warning signs and pictograms affixed directly to the machine.
General safety precautions, responsibilities, and prohibitions for machine operation and maintenance.
Specific warnings and precautions to be observed while the machine is in operation.
Requirements and responsibilities for personnel operating the vacuum packaging machine.
Detailed overview and identification of the main physical components of the vacuum packaging machine.
Explanation of the step-by-step vacuum packaging process and general machine functions.
Description of the sealing system, including sealing bars, wires, and Teflon tape.
Details about the vacuum pump, its components, and function.
Information on the machine's electrical installation, power connection, and control panel.
Guidelines for safely moving, transporting, and positioning the vacuum packaging machine.
Instructions for connecting the machine to the power supply and ensuring correct voltage compatibility.
Pre-operation checks, including oil level verification and initial pump cleaning program.
Overview and function of the control panel buttons, display, and indicators for the 1-program control system.
Steps for powering on, initiating, and manually advancing the vacuum packaging cycle.
How to stop programs and modify settings like vacuum time and seal time for the 1-program control.
Guidance on setting function values for vacuum and seal time, and their impact on the packaging process.
Schedule outlining required maintenance activities, inspections, lubrication, and replacements with their frequencies.
Instructions for safely cleaning the machine's surfaces using appropriate methods and agents.
Procedure for running the pump cleaning program to maintain pump health and remove moisture.
Steps for safely draining and refilling the vacuum pump oil, especially after prolonged storage.
Instructions for replacing the oil exhaust filter, with specific guidance for different pump capacities (3-4 m³, 8 m³, 16 m³).
Procedure for replacing worn or damaged sealing wires and Teflon tape on the sealing bar.
Instructions for replacing the silicone rubber components in the holders to ensure a good seal.
Procedure for replacing the lid gasket to maintain vacuum chamber seal integrity.
Checks for wear, corrosion, and damage on lid springs and their fastenings.
Statement of Henkelman BV's limited liability regarding product use, damage, and third-party claims.
Technical specifications for the Jumbo series vacuum packaging machines, including dimensions, capacity, and electrical data.
Template for recording maintenance activities, modifications, and emergency events for the machine.
Declaration of conformity with EU directives for the Jumbo series vacuum packaging machines.
To Next Page
