Maxima Advanced Ultrasonic Cleaner MA210 - 7
TROUBLE SHOOTING
Problem Cause Solution
Warning symbol is on; the
unit has been running ex-
tensively.
At least one of the transducers is
under overheat protection.
Stop the unit for 15 minutes
or more until the warning
symbol dims before resuming
operations.
Warning symbol is on; Warn-
ing symbol doesn’t turn off
after unit is left idling for 15
minutes.
At least one transducer is not
working.
Contact Henry Schein Hand-
pieces & Small Equipment
(pg 8).
Unit isn’t draining properly. Debris is caught in hose. Detach the drainage hose and
fl ush out any debris in hose
and inside the unit.
Unit is beeping. Unit is running but the lid is off. Place the lid back the unit.
Unit is not turning on. The power cord may be loose or
detached.
Check the power cord and en-
sure power is coming from the
outlet it is plugged into.
SPECIFICATIONS
Description Ultrasonic Cleaner
Model Maxima Advanced Ultrasonic Cleaner MA210
Tank Capacity
8.0L /
2.1 gallon (US)
Max. 7.0 L / 1.8 gallon (US)
Min. 3.6 L / 0.95 gallon (US)
Tank Size 33.1x23.8x11.6 cm / 13.0"x9.4"x4.6"
Longest Item Fits inside Tank 37.0 cm / 14.4”
Power Supply
240W AC 100~120V 60Hz
240W AC 220~240V 50Hz
Timer settings 5min > 7.5min > 10min > 12.5min > 15min
Degas timer settings 60, 120, 180 seconds
Ultrasonic Frequency 48KHz ± 3KHz
Tank Material Stainless Steel SUS304
Housing Material Aluminum + ABS
Net Weight 14.3 kg / 31.5lb
Gross Weight 17.1 kg / 37.7lb
Unit Size 46.6x35x22.9 cm / 18.3"x13.8"x9.0"
To Next Page
Loading...
