To Next PageTo Next PageWhat to do if the Henry Schein Engine handpiece doesn't rotate when the light is on?
If the handpiece of your Henry Schein Engine doesn't rotate when the light is on, it might be due to an E1 error. To resolve this, make sure to close the chuck.
Why is my Henry Schein Engine not turning on?
If your Henry Schein Engine is not turning on, the control unit may have an issue. Check the fuse and the power button to troubleshoot the problem.
What to do if the Henry Schein Engine handpiece doesn't rotate when the pedal is pressed?
If the handpiece of your Henry Schein Engine does not rotate when the pedal is pressed, ensure that the cable is correctly connected.
General| Brand | Henry Schein |
|---|---|
| Model | MICRO-MOTOR L50 |
| Category | Engine |
| Language | English |
Details the warranty period for the handpiece and control box, and exclusions.
Outlines conditions for service charges, including user misuse and improper operation.
Instructions for turning the unit on and off, including indicator lights and beeps.
Steps for connecting the power cord, foot pedal, and handpiece to the control box.
How to adjust speed using the dial and select rotation direction.
Describes overload behavior, error display, and how to reset the motor.
Diagnoses why the motor may not run and provides solutions for power, chuck, and connection issues.
Addresses issues where the motor runs but the RPM does not increase.
Covers cleaning, storage, and usage guidelines to maintain the unit's performance.
Instructions on how to locate and replace the fuse.
Explains error codes displayed by the control box and corrective actions.
Step-by-step guide for safely changing the collet chuck.
