3 Use of remote
The Arctic rise-recliner is operated
using TiMotion-remote. The remote
is easily accessible, hanging on the
outside of the armrest, on the right
side as standard. This can be
moved to the left side if needed.
Arctic 17standard
A
–
Lifting the chair
When button A is held in, the chair
rises. If the back and leg supports are
in use, they are re-aligned before the
operation begins.
B
–
Default position
When button B is held, the chair
returns from a risen position to its
default position.
C
–
Leg support up
When button C is held in, this raises
the leg support up and out.
Remember, in order for the leg
support to be operable, the chair
must be in its default position. If the
leg support does not work, please
return the chair to its default position
first by pressing button B.
D
–
Leg Support Down
When button D is held in, this returns
the leg support back to normal.
To Next Page
Loading...