Adjusting the seat height
In order for your Arctic to deliver maximum comfort, it is necessary to adjust
the seat height to suit your needs. This is done as follows:
Tilt the chair forward so that is rests on the leg support and the front of the
armrests.
•
Loosen the screws so that the actuator bracket moves freely A.
•
Loosen the column by opening the screw B.
•
Pullout the spring loaded bolt C.
•
Move to the desired position
•
Release the spring bolt so that it will fit into the nearest hole and
lock the column with the screws. Tighten well.
NB! Make sure the release fastenings do not get too tight, but glide freely. Also make
sure that the fabric strip from the foot pad is moved forward on the seat plate so that it
is not too tight!
To Next Page
Loading...