Adjustment of the back
The upper part of the back can be
used to extend the back. Lift it up or
press it down as desired. It locks
into stepped groves on the pins.
The upper part of the back can also
be angled. Bend it back or forth until
you find the position that suits you.
If you want a shorter back, the
upper part can be completely pulled
off.
Adjustment of neck pillow
The neck pillow hangs loosely over
the backrest, guided by a cloth
guard on the back. This, combined
with counterweight, ensures that the
pillow stays in place when placed in
the desired position.
If you choose to use only the lower
part of the back, your pillow can be
moved down.
Adjustment of leg support
The leg support is attached to a
scissor mechanism with two sliding
rails. A tension strap pulls in the foot
pad when the leg rest is pushed in.
The leg support grows in length
when released and detracts when
returned to the default position.
UPPER BACK
To Next Page
Loading...