Why Herdio HOS-601 have no power?
If your Herdio speakers aren't powering on, it could be due to a loose power connection or a damaged power adapter. Check if the power adapter is properly connected to the power connector. Also, verify if the power light is on, as this indicates whether the power adapter is functioning correctly.
What to do if Herdio HOS-601 Speakers have power but no sound?
If your Herdio speakers have power but aren't producing any sound, the issue might stem from incorrect wiring or loose connections. Ensure that the speaker's positive (red +) terminal is connected to the amplifier's positive terminal and the negative (black -) terminal is connected to the amplifier's negative terminal. Also, verify that all speaker wires are securely connected and not loosely wired.
Install speakers under overhangs, no more than eight feet apart and at ear level for best sound.
Connect red to positive and black to negative terminals. Use 16 gauge wire if needed.
Mount speakers using brackets and plastic knobs, tilting down for longevity and weather protection.
Connect your Bluetooth device, search for the speaker model, and connect to play music.
To Next Page
General
