202207V1.1
info@estarpower.com
www.estarpower.com
technicians).
Install Microinverter underneath of the photovoltaic modules to make sure it works in the shadow. If this
condition cannot be met, might trigger the inverter production de-rating.
4.5Installation Steps
4.5.1Step 1. Attach Microinverter on Rail.
A) Mark the approximate center of each panel on the frame.
B) Fix the screw on the rail.
C) Hang the microinverter on the screw (as shown in the picture below), and tighten the screw. The black
cover side of the microinverter should be facing the panel.
To Next Page