“FIRE ON”
“ON 1”
“ECO”
phase it is not possible to modify the power setting.
If the temperature is set at 41°C the stove will remain in continuous operation at
the programmed work power without passing to the economy mode '%1
“STOP FIRE”
speed and the pellet loader at minimum.
“FAN - ACC”
“LOAD WOOD”
5.0 Display information
“OFF”
ATTE
cycle. Wait until the cooling phase is completed before proceeding with a new switching on.
4.1 How to replace the batteries of the remote control
If you need to replace the batteries of the remote control,
the old batteries with the new ones respecting the pola
To Next Page
Loading...
