6.4 Cleaning the metal parts
used, our company declines any responsibility.
Eventual variations in the colour of the metal parts can be caused by an incorrect use of the stove.
6.5 Cleaning the brazier and brazier support
is accompanied by black smoke, this means that there are
ash deposits or incrustations that do not permit the correct
then clean out the ashes and eventual incrustations that may
have formed, paying particular attention to liberating the ho
lighting the first several times and above all if using pellets
cy of this operation is determined by how frequently the stove
is used and the choice of pellets.
the eventual ash present.
6.6 Cleaning the ceramic covering (if supplied)
it is hot as the thermal shock could cause breakage!
!
it is necessary to daily clean the brazier and often clean the
ash box.
causing damages to the stove itself and to the environment
(possible emission of unbrunt material and soot).
Do not re-use the pellet possibly remained in the brazier
due to no starting-up.
!
6.3 Cleaning the surfaces
to try it on a small section out of sight or contact the Authori-
zed Assistance Centre for information regarding the product.
!
To Next Page
Loading...
