HERKULES FSG 2000 User Manual

Art.-Nr.: 43.012.51 I.-Nr.: 01025

Bedienungsanleitung
Radial-Fliesenschneidmaschine

Operating Instructions
Radial Tile Cutting Machine

Mode d’emploi
Coupe-carreau radial

Manual de instrucciones
Cortadora de cerámica radial

Istruzioni per l’uso della
Tagliapiastrelle radiale

Betjeningsvejledning

Fliseskæremaskine

Bruksanvisning
Radial-kakelsåg
 Käyttöohje
Radiaali-laatanleikkauskone

Návod k použití
Radiální řezací stroj na dlaždice

Navodila za uporabo
Radialni rezalni stroj za ploščice

Naputak za uporabu
Radijalni stroj za rezanje keramičkih obloga

Kullan∂m K∂lavuzu
Radyal Fayans Kesme Makinesi

FSG 2000
Anleitung FSG 2000 Herkules 21.12.2005 13:17 Uhr Seite 1

HERKULES FSG 2000 Specifications

General

Brand	HERKULES
Model	FSG 2000
Category	Cutter
Language	English

Summary

Machine Description and Components

1. Description of the Machine

Details the various components and parts of the radial tile cutting machine.

2. Items Supplied

Lists all the components included with the tile cutting machine.

Intended Use and Safety Instructions

3. Intended Use

Specifies the machine's design purpose for cutting ceramic tiles.

4. Important Instructions

Crucial information for safe and correct operation.

4.1. General

Read manual carefully, understand operation and safety regulations before first use.

4.2. Additional Safety Instructions

Set up on level floor, ensure stability, check voltage, wear safety goggles and ear-muffs.

Technical Data and Preparation

5. Technical Data

Provides specifications like motor rating, speed, cut dimensions, and noise levels.

6. Before Using for the First Time

Ensures the machine is set up firmly and ready for operation.

Assembly and Operation Procedures

7.1 Assembly

Step-by-step guide for assembling the machine and its components.

7.2 ON/OFF Switch

Instructions on how to safely power the machine on and off.

7.3 90° Cutting

Procedure for making straight cuts at a 90-degree angle.

7.4 45° Diagonal Cut

Procedure for making angled cuts at 45 degrees.

7.5 45° Lengthwise Cut, "jolly cut"

Procedure for making lengthwise cuts at 45 degrees.

7.6 Changing the Diamond Cutting Wheel

Step-by-step guide for safely replacing the cutting wheel.

Maintenance and Parts Ordering

8. Maintenance

Guidelines for cleaning, lubricating, and general upkeep of the machine.

9. Ordering of Replacement Parts

Information required when ordering spare parts for the machine.

Environmental Information and Disposal