To Next PageTo Next Page
Need help?Do you have a question about the HERKULES STR 250 LED and is the answer not in the manual?
Essential safety and operating instructions to read before initial use.
Description and identification of machine parts and components.
List of items included in the package with the stone cutting machine.
Instructions for correct and intended use of the stone cutting machine.
Crucial general advice and specific safety precautions for machine operation.
Detailed technical specifications of the stone cutting machine.
Steps for initial setup and checks before operating the machine.
Explanation and testing procedure for the Residual Current Device (RCD) plug.
Step-by-step instructions for assembling and operating the machine.
Instructions for attaching the hose and cable guide for water management.
Steps for assembling the sub-frame and cooling water pump.
How to correctly turn the machine on and off using the switch.
Detailed guide for making straight cuts at a 90-degree angle.
Instructions for executing cuts at a 45-degree angle.
Guide for making 45-degree lengthwise cuts, also known as a jolly cut.
Techniques and considerations for cutting larger workpieces effectively.
Procedure for safely and correctly replacing the diamond cutting wheel.
Instructions for using the machine's LED work light for illumination.
Alternative uses for the LED light, including as a torch or spirit level.
Step-by-step guide for replacing the battery in the LED light unit.
Recommended maintenance tasks including cleaning and lubrication.
Information and requirements for ordering spare parts for the machine.
General