To Next PageTo Next PageWhat to do if HERKULES Air Compressor does not stop?
If your HERKULES Air Compressor doesn't stop and the safety valve trips, it's likely due to irregular compressor operation or a malfunctioning pressure switch. Disconnect the plug and contact the Service Center for assistance.
Why HERKULES Air Compressor stops after a few attempts to restart?
If your HERKULES Air Compressor stops after several restart attempts, it's probably because the thermal cutout tripped due to the motor overheating. This can happen if you remove the plug while the compressor is running or if the power voltage is low. Try activating the on/off switch, ventilating the work area, and waiting a few minutes. The compressor should restart on its own.
How to fix HERKULES Air Compressor that stops and restarts automatically?
The HERKULES Air Compressor might be stopping and restarting automatically due to the thermal cutout tripping because the motor is overheating. To solve this, clean the air ducts in the conveyor and ensure the work area is well-ventilated.
General| Brand | HERKULES |
|---|---|
| Model | PRO-LINE Siltek+ |
| Category | Air Compressor |
| Language | English |
Mechanism for starting and stopping the compressor operation.
Indicates pressure allowed into the discharge line.
Adjusts air pressure available at the discharge line.
Ball style valve to drain moisture from the tank.
Connects the airline to your tool for air supply.
Prevents over-pressurization of air tanks; do not adjust.
Component for moving the compressor safely.
Part of the base for stability.
Filters air entering the compressor to prevent debris.
Indicates the pressure inside the tank.
Instructions for attaching the air intake filter to the compressor.
Steps for connecting the quick coupler to the outlet.
How to turn the compressor on and off using the switch.
Procedure for setting the air pressure using the regulator.
Information on the factory-set pressure switch operation.
Guidelines for cleaning the compressor and its components.
Daily procedure for removing condensation water from the tank.
How to test and verify the function of the safety valve.
Instructions for storing the compressor safely and properly.
