Need help?Do you have a question about the Hermle Z 216 MK and is the answer not in the manual?
Essential safety guidelines and precautions for operating the centrifuge.
Details on intended purpose, brief description, and delivery contents.
Explanation of the centrifuge's buttons, knobs, and LCD screen layout.
Identification of warning labels, general indications, and warranty information.
Procedures for unpacking, determining space requirements, and setting up the unit.
Guide to initial settings like rotor type, temperature, and operational signals.
Procedures for installing and properly loading rotors into the centrifuge.
Steps for releasing and locking the centrifuge lid.
Setting speed, time, acceleration, deceleration, and temperature parameters.
Managing stored programs and utilizing the timer function for runs.
How to start/stop runs and what happens during imbalance detection.
Routine cleaning procedures for the unit, rotor chamber, and accessories.
Methods for disinfecting aluminum and PP rotors, including autoclaving.
Handling procedures and precautions for managing glass tube breakage.
Information on the operational lifespan of rotors and accessories.
Lists common error messages and their potential causes and solutions.
Manual procedure to open the lid during power failure or malfunction.
Explanation of the error message system and specific error handling steps.
Precautions and requirements for returning equipment for repair, including decontamination.
Instructions regarding the return of the power cord with the centrifuge.
Recommendations for safely transporting the centrifuge, including packaging.
Environmental requirements for storing the centrifuge to maintain performance.
Guidelines for the proper disposal of the electrical equipment.
Official declaration of compliance with relevant EU directives and standards.
Compiles technical data, weight, temperature, speed, and RCF values.
Provides radius correction data and abbreviations used in the manual.
General| Type | Centrifuge |
|---|---|
| Max Speed | 15, 000 rpm |
| Max RCF | 21, 379 x g |
| Power Supply | 230V, 50/60Hz |
| Refrigeration | No |
| Capacity | 44 x 1.5/2.0 mL tubes |
| Motor | Brushless motor |
| Timer | 1 to 99 min, continuous |
To Next Page
