Hertz HT 20 - Technical Specifications

TECHNICAL SPECIFICATIONS
Power handling (W) Component Size
mm (inch)
Magnet Dome / Cone Plus / Crossover
Component Adjustment
peak
Sensitivity
dB/SPL kg
Weight of one component
mm
Ø Voice coil Impedance
Ω
Frequency response
Hz
continuous
Outer diameter
mm
A
Mounting diameter
mm
B
mm
Total depth
C
mm
Mounting depth
D
mm
Magnet size
E
Manuale d’uso | Owner’s manual
B
C D
A
E
E
B
A
C D
CIFICATIONS
HNICAL
HT 20 Tweeter 20 (3/4") 100 Hi-pass@3.0 4 1.9k ÷ 22k 91 38 35 22 14 19 0,035 20 Neodymium REN
®
Tetolon Fiber
®
Rear Acoustic
kHz 12dBOct. Chamber
HT 25 Tweeter 25 (1") 120 Hi-pass@2.5 4 1.6k ÷ 22k 92 44 41 26 15 24,5 0,06 25 Neodymium REN
®
Tetolon Fiber
®
Rear Acoustic
kHz 12dBOct. Chamber
HT 28 Tweeter 28 (1"
1/8
) 180 Hi-pass@2.0 4 1.2k ÷ 22k 93 48 45 29 19 27,9 0,07 28 Neodymium REN
®
Tetolon Fiber
®
Rear Acoustic
kHz 12dBOct. Chamber
HL 70 Full Range 70 (3") 100 50 4 200 ÷ 14k 92 88 73 44 38 40 0,17 20 Neodymium REN
®
Damped V-Cone
®
Mesh Fibre
HV 165L Woofer 165 (6"
1/2
) 200 100 4 40 ÷ 5k 92 167 146 79 70,5 85 1,18 30 High density Non pressed paper V-Cone
®
flux ferrite with cotton fiber
HV 165XL Woofer 165 (6"
1/2
) 250 125 4 40 ÷ 6k 93,5 167 146 84,5 75 95 1,48 30 High density Damped XL V-Cone
®
flux ferrite Mesh Fibre
HSK 130 2 Way System Tweeter 25 (1") 200 100 4 60 ÷ 22k 91 44 41 26 15 24,5 0,06 25 LO/HI-pass 3.2kHz Tweeter: -2, 0, +2 dB
Woofer 130 (5"
1/4
) 131 115 73,5 65 85 1,039 25 @ 12/12 dB Oct.
Crossover
HSK 165 2 Way System Tweeter 25 (1") 250 125 4 50 ÷ 22k 92 44 41 26 15 24,5 0,06 25 LO/HI-pass 3.2kHz Tweeter: -2, 0, +2 dB
Woofer 165 (6"
1/2
) 167 146 79 69 85 1,125 30 @ 12/12 dB Oct.
Crossover
HSK 165XL 2 Way System Tweeter 28 (1"
1/8
) 300 150 4 40 ÷ 22k 93,5 48 45 29 19 27,9 0,07 28 LO/HI-pass 2.5kHz Tweeter: -2, 0, +2 dB
Woofer 165 (6"
1/2
) 167 146 83 75 95 1,48 30 @ 12/12 dB Oct.
Crossover
HSK 163 3 Way System Tweeter 25 (1") 300 150 4 40 ÷ 22k 92 44 41 26 15 24,5 0,06 25 LO/BAND/HI-pass Tweeter: -2, 0, +2 dB
Midrange 70 (3") 88 73 44 38 40 0,17 20 500/4.5k Hz @ Midrange: -2, 0, +2 dB
Woofer 165 (6"
1/2
) 167 146 79 70,5 85 1,18 30 6/6-6/12 dB Oct.
Crossover
HCX 130 2 Way Coaxial Woofer 130 (5"
1/4
) 140 70 4 60 ÷ 22k 91 131 115 84 65 85 1,085 25 High density Damped Integrated
Tweeter 20 (3/4") flux ferrite Mesh Fibre 4 kHz@6 dB Oct.
HCX 165 2 Way Coaxial Woofer 165 (6"
1/2
) 200 100 4 50 ÷ 22k 92 167 146 86 69 85 1,17 30 High density Damped Integrated
Tweeter 20 (3/4") flux ferrite Mesh Fibre 4 kHz@6 dB Oct.
HCX 690 3 Way Coaxial Woofer 6"x9" 260 130 4 32 ÷ 23k 94 241 222 105 86,5 110 2,15 38 High density Damped Integrated
Tweeter 28 (1"
1/8
) flux ferrite Mesh Fibre 4/10 kHz@6 dB Oct.
Supertweeter 20 (3/4")
46 47
Esec_Advanced Manual_Hi Energy.1:Advanced Manual Hi energy 29/06/09 09:08 Pagina 46