1.2. Legal provisions
HESCH Industrie-Elektronik GmbH, Boschstraße 8, 31535 NEUSTADT, GERMANY
The solenoid valve control HE 5731 is used for cleaning industrial filter systems. The
number of valves is from 1 to a maximum of 64, and can be scaled, using modular exten-
sion units. The cleaning and de-dusting with HE 5731 can be carried out time-controlled
or differential pressure-controlled. It can be operated with, as well as without an actual
valve control. A total of 64 valves can be controlled at one time.
The controller can be operated within the operating and environmental conditions ap-
proved in this manual without impairing its safety.
The manufacturer is not liable for improper use and any resulting personal injury or mate-
rial damage; the risk is borne solely by the user. Failure to comply with the above criteria
for intended use may result in the expiry of the warranty and liability for the device.
All work on the solenoid valve control may only be carried out by qualified electricians
with sufficient knowledge in the field of electrical engineering.
This documentation is intended for all electrically qualified people, who design, install, set
up, and adjust the HE 5731 filter controller.
The device has been constructed and tested in accordance with VDE 0411 / EN 61010-1
and has left the factory in perfect safety condition. To maintain this condition and ensure
safe operation, the user must observe the notes and warnings described in this manual.
To Next Page
Loading...