Hessaire MC92 - Quick Start; Setup and Initial Use

Quick Start
After unpacking your evaporative cooler, carefully inspect for any damage that may have occurred
during transit. Inspect for loose, missing or damaged parts.
Contents: Evaporative cooler (1), Hardware Bag (1), Casters (4)
Tools / Materials Needed: Drill with #2 Phillip’s bit or Phillp’s head screwdriver
A
B
C
D
E
Remove the
screws from
the top, rear
panel.
Lift and pull out
bottom of the
panel to remove.
Locate the bag/box of
hardware inside the
cooler. Remove the
hardware bag/box.
Check for 4 casters,
16 bolts and a
garden hose
adapter.
Install 4 casters
1 Install Casters and Front caster with lock
4 Fill cooler by
using bucket or hose
5 Turn the cooler
On and ENJOY
3 Connect to any
power supply
2 Install garden
hose adapter