Need help?Do you have a question about the HETRONIC ERGO F and is the answer not in the manual?
General| Operating Temperature | -20°C to +70°C |
|---|---|
| Protection Class | IP65 |
| Modulation | FSK |
| Output Power | 10 mW |
| Frequency Range | 433.05 - 434.79 MHz |
| Battery Life | Up to 20 hours |
Uses safety alert symbols and explains their meaning.
Provides general reference for operation and maintenance practices.
Emphasizes safe working practices and compliance with local rules.
Details training requirements for safe transmitter operation.
Identifies hazards and necessary precautions for radio control use.
Describes the system's electronic and mechanical safety features.
Outlines procedures for stopping the machine in an emergency.
Covers essential safety procedures for maintenance tasks.
Stresses the importance of reading all system component manuals.
Explains the location and use of unit identification numbers.
Details essential pre-operation checks and safety confirmations.
Provides an overview of the Ergo F transmitter's design and key features.
Lists and describes the different factory-programmed Ergo F models (V1, V2, V3).
Details the critical STOP function, including self-test and safe mode operation.
Instructions for inserting and securing AA disposable batteries.
Instructions for inserting and securing fully charged rechargeable batteries.
Procedure for charging optional rechargeable battery packs.
Instructions for utilizing the fast charging option for batteries.
Guidance on proper recycling of rechargeable batteries to prevent pollution.
Proper grip and orientation for reading symbols and text.
Pre-operation inspection for damage, wear, and label readability.
Step-by-step procedure for powering on and verifying transmitter readiness.
Procedure for activating the STOP function and its effect on the system.
Identifies problems, probable causes, and corrective actions for system operation.
Details key technical data including housing, power, range, and features.
To Next Page
