EasyManua.ls Logo

HETRONIC NOVA L - User Manual

HETRONIC NOVA L
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
NOVA Transmitters
USER MANUAL
09/2019
www.hetronic.com

Table of Contents

Other manuals for HETRONIC NOVA L

Preview: Operator's Manual
Operator's Manual33 pages
Preview: Technical Data Sheet
Technical Data Sheet2 pages
Preview: Quick Reference
Quick Reference2 pages

Questions and Answers

  • T
    Tammy LynchAug 9, 2025
    What to do if HETRONIC NOVA L is transmitting but machine not responding?
    • L
      Laura HerreraAug 9, 2025
      If your HETRONIC Transmitter is transmitting (Power LED flashing) but the machine isn't responding, there could be several reasons. First, ensure the receiver has power by checking the diagnostic LEDs and verifying proper grounding. If the receiver is powered off, turn it on. Also, check all fuses in the receiver and replace any that are blown. The transmitter may be out of range; move it closer to the receiver and press START. If the transmitter/receiver frequency channels do not match, follow instructions under “Setting Frequency and channels” or contact your supervisor. If the STOP failure in receiver, red STOP LED on PC board is illuminated, contact your supervisor.
  • P
    paul06Aug 14, 2025
    How to fix HETRONIC NOVA L Transmitter when it won’t start?
    • C
      Cory EscobarAug 14, 2025
      If your HETRONIC Transmitter won’t start, it might be due to an incorrect access code (if enabled). Try entering the correct access code. Alternatively, the battery may be fully discharged. If so, replace it with a fully charged battery.
  • A
    Amber LeeAug 21, 2025
    What to do if HETRONIC NOVA L is on but not transmitting?
    • A
      anthony78Aug 21, 2025
      If the HETRONIC Transmitter is turned on but not transmitting (Power LED not flashing), the battery might be discharged. Replace the battery with a fully charged one. If the problem persists, it could be due to component failure, in which case you should contact your supervisor or the nearest Hetronic Service Centre.
  • P
    pamelaoconnorAug 27, 2025
    Why do all machine motions operate intermittently with my HETRONIC NOVA L?
    • K
      kmartinezAug 27, 2025
      If all machine motions operate intermittently when using your HETRONIC Transmitter, check the receiver antenna connection to ensure it is tight and not missing; tighten or replace it if necessary. If using an external antenna, make sure it has a tight connection and proper grounding. For further assistance with external antenna issues, contact Hetronic or your Dealer for more information. Also, check all connectors inside the receiver and reseat if needed. If another frequency may be interfering with the system, contact your supervisor.
  • M
    Margaret VasquezSep 2, 2025
    How to fix HETRONIC NOVA L when battery status is not displayed?
    • H
      Heather NguyenSep 2, 2025
      If the battery status is not displayed on your HETRONIC Transmitter, the I2C connector inside the transmitter might be loose. Check all connectors and reseat them if needed.

Summary

Safety

1.1 Intended Use

Defines the purpose and intended application of the radio remote control system.

1.2 Symbol Notation

1.4 Required Operator Training

Stresses the importance of proper training and reading the manual before operation.

1.5 Possible Sources of Danger

Identifies potential hazards like accidental start-up and precautious measures.

1.6 Protective Features

Details the electronic and mechanical safety features of the transmitter and unique coding.

1.7 STOP in case of EMERGENCY

Instructs to press the emergency stop button on the machine for immediate halt.

Introduction and Functional Description

2.2 Before Operating Your Wireless Control Unit

Outlines pre-operation checks, safety precautions, and storage guidelines.

Your NOVA Transmitter

3.2 NOVA Basic Features

3.3 Standard NOVA Configurations

Details the standard configurations available for NOVA series transmitters like Nova-S.

Product Description

Operating Your Transmitter

5.2 Visually Checking Your Transmitter

Stresses the importance of inspecting the transmitter for damage before use.

5.3 Powering ON and Starting Your Transmitter

Details the procedure for turning on and initiating the transmitter.

5.4 Transmitter Initialization with Standard Status LED Indicator

Explains the initialization process and LED indicators for standard models.

5.5 Transmitter Initialization with Graphic User Interface (TFT) and Standard Status LED Indicator

Describes the initialization for TFT models, including LED and display feedback.

5.6 Stopping the Radio Remote Control

Explains how to safely stop the transmitter and receiver operation using the STOP button.

5.7 Battery State of Charge Indication

5.8 LED Behaviour and Meanings

5.9 Powering OFF the Transmitter

Describes the procedures for turning off the transmitter using the key switch or other methods.

Generic Radio Remote System functionalities

6.1 Start Function

Explains the role of the Start button in initializing radio control and enabling communication.

6.2 Stop Switch

Details the critical Stop function, its behavior, and safety implications.

6.3 Digital and Proportional Functions

6.4 Quickset;Programming mode

Describes how to enter programming mode to adjust speed settings for joysticks.

Setting up your Nova Transmitter for Operation

7.2 Communication

7.6 Inactivity Warning

7.9 Cable Control (optional)

7.9.2 Operation of NOVA in Cable Control Mode

7.9.3 Decoder Address Learning (CC interface)

7.9.4 Returning Transmitter to Wireless Mode

Installing the Radio Remote Control

Troubleshooting

Warranty, Service, Repairs and Maintenance

Appendix B

B.1 Operator Safety Basics

Lists fundamental safety precautions for operators before starting their shift.

B.2 Safety Checklist

HETRONIC NOVA L Specifications

General IconGeneral
Operating Temperature-20°C to +70°C
Protection ClassIP65
Output Power10 mW
Power SupplyBattery
Supply Voltage3.6 V

Related product manuals