USER MANUAL | NOVA L
2
Transmitter Specifications
Ergonomically designed Impact Resistant Polymer Composite
IP 65 (Exceeds Nema 12/13)
~0.745kg (1.6lbs) depending on configuration
Internal as default, external via TNC connector
3.6V NiMH rechargeable battery
5 to 30V for cable control
Status LED for operation and standard/advanced low battery
detection
Min 12 hrs continuous transmission*
2x Single/Dual/Triple axis cross joysticks
6x Single axis paddle levers
Combination of key switches, toggle switches, push buttons, rotary
switches, potentiometers and stop switches
Customized switches available upon request
Half or Full duplex feedback
4xxMHz or 8xxMhz or 9xxMHz or 1.216GHz or 2.4GHz**
150m (492ft) for ≤ 1GHz 10mW module (Line-of-Sight)
70m (150ft) for 2.4GHz 10mW module
20-bit programmable address concept with up to 1,000,000
combinations
Active & Passive Stop Function
Operating Temperature Range
-25°C . . . 70°C (-13°F . . . 158°F)
0 - 97% maximum non-condensing
Belly belt, neck belt, chest belt or shoulder bar
Cushion and customer logo option
Optional Custom housing colour
Back-lit monochrome TFT 120x32
Technical Specification Transmitter Nova L
*varies by transmitter configuration
** for full Channel Lists refer to Frequency Bands Radio Modules Charts
*** higher power available subject to country legislation
Monochrome LCD Display (optional)
There are several standard screens that are displayed on the LCD:
1. Software version
As soon as the display turns on the LCD type and software version installed in the controller are displayed.
2. Welcome screen
GRAPHIC LCD 120x32
SOFT. VERSION: 2.60
To Next Page
Loading...
