6
6
1. Introduction
1.2 Notes for the operator
In addition to these operating and mounting instructions and
the rules on accident prevention that are binding in the
country of use or at the site of use, the recognised technical
rules for safety-compatible and professional work must be
observed as well.
The operator of the double drive must not perform any
attachments or conversions to modifications of the unit that
may impair safety without the manufacturer's approval.
Components used must comply with the technical
requirements specified by the manufacturer.
Only deploy trained or instructed staff and clearly specify the
responsibilities of staff for operation, maintenance and repair.
Always subject your end product (comfort bed /
slatted bed frame) to a risk assessment, so that
you will be able to react to possible residual
dangers, e.g. by constructional measures or by
information in the operating instructions and /
or by safety notes on your product).
Note
To Next Page
Loading...
