Need help?Do you have a question about the Hettich Mosys and is the answer not in the manual?
General| Output Power | Varies depending on the specific Mosys configuration; refer to individual product documentation |
|---|---|
| Output Voltage | Varies depending on the specific Mosys configuration; refer to individual product documentation |
| Current Rating | Varies depending on the specific Mosys configuration; refer to individual product documentation |
| Control Type | Electronic control |
| Protection Features | Overcurrent protection, short circuit protection, overvoltage protection (depending on the specific module) |
| Communication Interface | CAN bus |
| Cooling Method | Natural convection |
| Ambient Temperature | +5°C to +40°C |
| Enclosure Rating | IP20 |
Limits the system's use to beds and specifies conditions for warranty claims.
Explains symbols used in the manual for danger, caution, and notes.
Provides instructions for fire safety and disconnecting the drive unit.
Details risks to children, including packaging and supervision requirements.
Warns about electrical dangers and proper cable routing to prevent damage.
The system is only allowed to be used in beds for raising and lowering sections.
Prohibited uses of the system, including healthcare and heavy loads.
Instructions for disposing of the drive unit and batteries according to regulations.
Guidelines for operating the drive unit in intermittent duty to avoid overloading.
Information on wired and wireless remote controls for operation.
Information on power supply units and emergency lowering battery.
To Next Page
